Why 9KT and 14KT gold jewellery needs a different kind of care: 7 tips to keep it looking new

Before you buy 9KTor 14KT gold jewellery, know why it needs different care to stay shiny and beautiful.

Having gold jewellery is more than just an accessory, but an investment for a lifetime. However, not all gold ages the same way. A piece made in 9KT or 14KT, the two purities behind most lightweight, everyday jewellery, carries a higher share of alloy metals such as copper, silver and zinc. That's what gives it the strength to hold fine, delicate designs, but it also makes it more reactive to air, moisture, sweat and everyday chemicals than higher karat gold. In an interview with HT Lifestyle, Trisha Paul, head of merchandising at KISNA Diamond and Gold Jewellery, breaks down what this means in practice.

Step 1: Store it with extra care

According to Trisha Paul, these alloys tarnish or dull faster than higher karat gold if left in a humid space. A dry, lined box with separate compartments is essential, and a silica gel sachet or anti-tarnish strip tucked inside slows this down considerably. “Diamonds are tougher than most stones and metals, so they can scratch gold if pieces touch, which means the two should never share a compartment,” added Trisha. Close every clasp before storing a piece, and give chains and earrings their own space.

These alloys tarnish or dull faster than higher karat gold if left in a humid space.

Step 2: Limit what touches it

The lower gold content also means the surface layer is thinner, so abrasive cleaning wears through it faster, exposing the alloy underneath and inviting tarnish sooner. Skip toothpaste, powders and harsh cleaners. Trisha advises lukewarm water with a little mild soap, a soft brush for the setting, a thorough rinse and a lint-free cloth to dry is enough. A quick wipe after each wear does more for these pieces than any deep clean.

The lower gold content also means the surface layer is thinner, so abrasive cleaning wears through it faster.

Step 4: Handle lightweight pieces carefully

A good deal of everyday lightweight jewellery is made in 9KT or 14KT gold precisely because the alloy strength allows for finer, more intricate designs, and this is especially true of lightweight diamond-studded pieces. The settings holding those stones, often pave work or slim micro prongs, are built with less metal to begin with, so they demand a gentler touch than a solid gold piece of the same weight would. Never tug it off, avoid stacking it with heavier pieces, and keep it in a compartmentalised case rather than loose in a bag, where a prong can catch on fabric or another piece and bend.

Step 5: Schedule professional servicing

An annual check-up matters here as much as anywhere else, and more often for lightweight diamond-studded pieces, where the finer prongs holding each stone can loosen with regular wear well before the metal itself shows any wear. Jewellery can tighten settings, check clasps, clean what you can't reach at home, and polish only when needed.